Built-In Mounting Brackets; Layer 3 Routing Protocol Table Sizes - Brocade Communications Systems FastIron SuperX Hardware Installation Manual

Alternatively, you can use a rack mount kit (ordered separately) to center-mount the FSX and FSX
800 using two L-shaped mounting brackets. The rack mount kit comes with instructions for
installing the mounting brackets and mounting the device in a rack.
The FSX 1600 does not have built-in mounting brackets. Two brackets ship with the FSX 1600 that
enable you to front-mount or center-mount the chassis in a rack.
Contact Brocade for information about rack mount kits.

Layer 3 routing protocol table sizes

Use the show default values command to display Layer 3 routing protocol table sizes. The
command output shows the default, maximum, and currently configured values. Refer to the
FastIron Configuration Guide for an example output.
Brocade FastIron X Series Chassis Hardware Installation Guide
53-1001723-02
Layer 3 routing protocol table sizes
1
39