Electronics Overview - LifeSpan TR500 Owner's Manual

electronics overview

Display Functions
Quick
InclineButtons
Raise and Lower
Treadmill/Used
for Program Setup
Mode Button – used for Program
setup and switching display readouts.
Grounding Instructions
This product must be properly grounded to work safely and properly. If a malfunction should
occur, grounding provides a path for electric current and reduces the risk of electric shock.
Your LifeSpan treadmill includes a standard American ground plug. Do not alter this plug in anyway
and do not by pass the ground with an adapter. Plug your treadmill into a 120 volt / 20 amp
grounded electrical outlet with 120 volts measured at the treadmill. If this breaker switch has
other appliances that run at the same time, you may experience problems with the breaker switch
or erratic performance from your treadmill.
Using electrical power other than the one specified above will void any warranty, implied
or otherwise.
Note: This unit may not work with a common GFCI outlet.
Treadmill
Plug
Safety Key must be in place
for the display to function
Grounded
socket
Grounded Wall Outlets
Warnings
Improper connection of the grounded plug can
result in the risk of shock. Check with a qualified
electrician if you have any questions or are
in doubt as to whether the product is properly
ground.
Never use extension cords between the treadmill
and wall outlet.
10
Multifunction LCD:
Time, Distance, Calorie,
Heart Rate, Speed, Incline
Quick Speed
Buttons
Increase and
Decrease
Speed/Used for
Program Setup
Quick Start/Pause/Stop