LifeSpan TR500 Owner's Manual page 24

TR500/TR1000 20" Wide Metric/English Conversion
Press Reset and then Incline Up buttons simultaneously
and release. The display changes over to console
software date and version.
Press Mode
The Display changes to:
ML = miles
KM = Kilometers.
Use the up or down arrows to change.
Press Mode
The Display changes to:
Wheel – means roller size. On these 2 models the
roller size is 2.0". Use the up or down arrows to adjust.
Press Mode
The Display changes to:
This is the PWM default value. It should be at 30.
Reset to 30 using the up or down arrows to adjust.
Press Mode
The Display changes to:
To turn the incline off use the up or down arrows.
The default setting is incline ON.
Press Mode
The console changes to:
Incline Potentiometer Max Reading.
Default is 200. Use the up or down arrows to adjust.
Press Mode
The console changes to:
Incline Potentiometer Minimum Reading.
Default is 29. Use the up or down arrows to adjust.
Press Mode
The console Displays the total time the treadmill
has run in Hours.
Press Mode
The console displays the total distance
the treadmill has run in Miles or Kilometer.
Press Mode
The console Displays Power Reset.
Pull the safety key and reinstall to save changes.
Console
This is just an example
2007
Console
Unit
Console
Wheel
Console
SPdM
Console
Incline
Console
INCx
Console
INCI
Console
0000
Console
00000
Console
PoWER RESET
20
07.20 V 1.0
ML or KM
2.0"
30
ON
200
29
HR
ML or KM