To Set Theclock; To Set The Timer; To Reset The Timer; To Cancel The Timer - Kenmore 911.36655 Owner's Manual

OPERATION
Clock and Timer
TO SET THE CLOCK
1, Press the CLOCK pad.
2. Press either the UP or DOWN
arrow pad, until the display shows
the correct time of day.
The UP arrow will change numbering
forward, such as 1,2, 3. The DOWN
arrow will change numbering back-
wards, such as 3, 2, 1..
The clock will automatically start within
one minute after releasing the arrow
pad; or you may press the clock pad
for immediate start,
TO RESET THE TIMER
When you are setting the timer, if you
pause more than 4 seconds while
pressing either the UP or DOWN
arrow pad, "TIMER" will stop
flashing in the display and the timer
will automatically start to count down°
tf this should happen just press the
TIMER ON/OFF pad and you will be
able to continue setting your time_
TO CANCEL THE TIMER
While the timer is counting down,
press and hold down the TIMER
ON/OFF pad for 4 seconds, or until
"TIMER'" quits flashing and the
current time of day returns to the
display.
TO SET THE TIMER
The timer does not control oven
operations, such as bake, broil, clean
or any delay function° It allows you to
set an amount of time and alerts you
when that time is up. An example
would be timing a three minute egg.
The maximum amount of time you
may set is 9 hours and 55 minutes_
1. Press the TIMER ON/OFF pad.
2. Press either the UP or DOWN
arrow pad to set the amount of
time you want.
The timer wil! automatically start to
count down 4 seconds after the time
is set.
1
When the timer counts down to
zero a tone will sound. Press the
CLOCK pad to return to the
current time of day.
11