Kenmore 911.36655 Owner's Manual page 22

CARE ANDCLEANING
RemovableParts
TO REMOVE
Be sure that all controls are turned off
and that the unit is coolo Lit off burner
grate, burner cap and burner head,
Do not remove burner bowl.
_ BURNER GRATE
_ _,.W_ BURNER HF..AO
MIXER TUBE;
BURNER
___._- _jJ_j- MIXER nee
(CHIMNEY)
The electrode of the
spark igniter is ex-
posed beyond the top
of the burner. When
cleaning the burner bowl, be
careful not to snag the electrode
of the spark igniter with your
cleaning cloth. Damage to the ig-
niter could occur. Be careful not
to turn on any cooktop controls
while cleaning burner bowls. A
slight electrical shock might re-
suit, which could cause you to
knock over hot cookware,
k- ii ii iiii1,111 i I
TO REPLACE
1, Place the burner head onto the burner
bowl making sure the location of the
spark igniter matches up with the
opening in the burner head,
2, Place the burner cap on the burner
head_
3, Place the grate over the burner
assembly and onto the burner bowl.
The indentations of the bowl should
match the location pins on the bottom
of the grates.
22