Table of Contents
Advertisement
Available languages
Available languages
Setting
Oven
ControMs
Overview
•
To Set or Change
Temperature for Normal
Baking
NOTE: The oven function
will not work if the time of
day clock is not set,
•
i_i 3 sec
•
•
•Oven
i,i,,ii......
i,,,,,iiii ....
_iiii_iroilJiii[ _!i_l_!i_ii!i!!!_J_iiiiiii_'
• Preheat
iii'V
JJ ,i! _Timer ii_ _i!' S top _ii_
_ii Set/Off ii!
Time
_!
• DoorLocked
.....
_
Note: Tile oven function will not work if the time of day clock is not set.
To Set or Change
the Temperature
for Normal
Baking
Tile oven can be programmed to bake at any temperature from 170% to 550% (65°C to 287°C).
I Note: The ovencontrol hasa builtoinsafety feature that will shut off the oven if the control is left on for more than 11 hours 5g minutes_ I
To Set the Controls for Normal Baking:
1.
Push SAKE pad (_."
" appears in tile display.
2.
Within B seconds, push the UP A or DOWN ARROW pad v.
Thedisplaywillshow"35O°F(177°C).
'' By holding the UP
A or DOWN ARROW pad v,
the temperature can then be adjusted in 5% (!°C) increments.
......
3.
As soon as the UP A or DOWN ARROW pad v
is released, the oven will begin heating to the selected temperature.
::::[i:::
....
When tile displayed temperature reaches the desired baking temperature, the control will beep 3 times.
4.
To cancel the baking function, push tile STOP CLEAR pad _.
To Change the Oven Temperature
after Baking has Started:
1.
If you are using the minute timer, push tile SAKE pad O
and make sure the bake temperature is displayed.
2.
Push the UP A or DOWN ARROW pad vto
increase or decrease the set temperature.
To Set Control
for Continuous
Bake or 12 Hour Energy Saving:
The oven control has a builtqn 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more than
11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.
To set controt for continuous baking:
1.
Push TIMER SET/OFF pad 0,
"O:OO" will appear in the display.
2.
Push and hold TIMER SET/OFF pad O
down for 5 seconds until tone is heard, "----
hr" will appear in display for
continuous cooking. The current time of day will return to tile display.
3.
To cancel the Continuous Bake Function, push TIMER SET/OFF pad _
and hold for 5 seconds until tone is heard.
"12hr" will appear in display indicating that tile control has returned to the 12 Hour Energy Saving feature.
To Set Control
for Oven Lockout:
The control can be programmed to lock the oven door and inactivate the oven controls.
To Set Control for Oven Lockout feature:
1.
Push the STOP CLEAR pad _
and hold for 3 seconds. "Lot" will appear in display, the "Door Locked" indicator light
will flash and the motor driven door lock will begin to close automatically. DO NOT open oven door while the indicator
light is flashing. Allow about 15 seconds for the oven door to lock. Once the oven door is locked, the current time of day
will appear in the display.
2.
To cancel tile lockout feature, push STOP CLEAR pad _
and hold for 3 seconds. The control will unlock the oven door
and resume normal operation.
Note: if any control pad is pressed while the Oven Door/Control
Lockout mode, "Loc" wi[[ appear in the display
until the control pad is released.
13
Advertisement
Chapters
Table of Contents
