Kenmore 911.36655 Owner's Manual page 4

IMPORTANT SAFETY
INSTRUCTIONS
install Anti-tip }_:!!
Device Packed With !_i'
Range ;,1
Remove all parts |torn the plastic
bag attached to the back of the
range and save packaging tape=
Before placing range in the counter,
chock the factory location of the
stability bracket on the back of the
range, For convenience you can hook
the stability chain in the upper set of
holes, Make sure there is no structural
interference when using the upper set
of holes,
Bracket
Optional
Location
Chain
1
1
Decide on
a location
that has
no
electrical
wiring or
plumbing,
.a;;:'°LlZ
and Screw
Make sure the
screw is
going into the
wall plate or
With the long screw provided.
anchor the
chain to the Chain
floor or wal!. Long \ II wall
Screw Wash& I_ Plate
stud at the base of the walt at least
3/4".
4, Attach the stability chain so that it
lines up with the bracket on the back
of the range,
.5. Tug the chain to make sure it is
securely fastened.
6. Take the packaging tape and
temporarily attach the loose end of
the chain to the rear of the
countertop,
Tape
7. Slide the range into
the counter leaving
enough space behind
to attach the chain to
the bracket,
1
1
Slip the nearest link of
the chain onto the
bracket, Pull to make sure it is as
snug as possible,
Slide the range all the way back. It is
normal to have some slack in the
chain, but it should not be excessive,
Bracket
Factory
Location
Mainback
4