Cancelling Messages Stored In Memory; Unsolicited Fax Rejection - Oki OKIFAX 5750 User Manual

5750GB.book Page 47 Tuesday, June 6, 2000 8:08 PM
machine receives a fax into memory because the toner level is low,
"MESSAGE IN MEMORY" will be displayed.
When NO TONER MEMORY RECEIVE is set to OFF, a warning
message "TONER LOW, REPLACE TONER CART." will be displayed.
Note: When the "TONER LOW, REPLACE TONER CART." message
is shown, it is possible to use the print from memory function to
print the faxes stored in memory, but the quality of the print
cannot be guaranteed. Replace the toner cartridge as soon as
possible.

Cancelling messages stored in memory

It is possible to erase messages stored in memory without printing them.
1. Follow the same instructions as for Print from Memory.
2. When prompted to print the message, press the STOP key and
"PRINT MEMORY MSG. MEMORY CANCEL?" will be dis-
played.
3. To erase or cancel the message without printing it, press the
ENTER key.

Unsolicited fax rejection

The machine provides a closed network option that allows the refusal of
unsolicited faxes. If activated, when there is an incoming call the machine
will compare the TSI (CIG) with the last four digits of the programmed
Speed Dial numbers. If there is no match, the incoming call will be refused
automatically, thus eliminating unsolicited faxes such as advertising. The
machine can also be set to neither send nor receive faxes from locations
whose telephone numbers are not programmed into the Speed Dial
memory. The available settings are limited reception (RX), limited trans-
mission and reception (TX/RX), and no limitations (OFF). Speed access
No. 21.
1. Press MENU/EXIT to enter the menu.
2. Enter speed access number 21 (Closed Network) and wait.
When CLOSED NETWORK display appears, press " or ! to
3.
select setting, press ENTER.
4. Press MENU/EXIT to return to standby mode.
Chapter 4 - Directories and Basic Operations
English
47