Download Print this page

Briggs & Stratton Vanguard 540000 Operator's Manual page 11

Gasoline

Advertisement

Available languages

Available languages

The California
Air Resources
Board, U.S. EPA, and Briggs & Stratton (B&S) are pleased
to explain the emissions
control system warranty on your Model Year 2013-2014
engine/equipment.
In California,
new small off-road engines and large spark ignited
engines less than or equal to 1.0 liter must be designed,
built, and equipped
to meet the
State's stringent anti-smog
standards.
B&S must warrant the emissions
control system
on your engine/equipment
for the periods of time listed below provided there has been
no abuse, neglect, or improper
maintenance
of your engine/equipment.
Your exhaust emissions
control system may include parts such as the carburetor
or fuel
injection system, ignition system,
and catalytic
converter. Also included may be hoses,
belts, connectors,
sensors,
and other emissions-related
assemblies.
Your evaporative
emission
control system may include parts such as: carburetors,
fuel tanks, fuel lines,
fuel caps, valves, canisters,
filters, vapor hoses, clamps,
connectors,
and other
associated
components.
Where a warrantable
condition exists, B&S will repair your engine/equipment
at no cost
to you including
diagnosis,
parts, and labor.
Manufacturer's
Warranty
Coverage:
Small off-road engines and large spark ignited engines less than or equal to 1.0 liter, and
any related emissions
components
of the equipment,
are warranted
for two years*. If any
emissions-related
part on your B&S engine/equipment
is defective, the part will be
repaired or replaced by B&S.
*
Two years or for the time period listed in the respective engine or product warranty
statement,
whichever
is greater.
Owner's
Warranty
Responsibilities:
As the engine/equipment
owner, you are responsible
for the performance
of the
required maintenance
listed in your owner's
manual. B&S recommends
that you
retain all receipts covering
maintenance
on your engine/equipment,
but B&S cannot
deny warranty solely for the lack of receipts or your failure to ensure the performance
of all scheduled
maintenance.
As the engine/equipment
owner, you should however
be aware that B&S may deny
you warranty coverage
if your engine/equipment
or a part has failed due to abuse,
neglect, improper
maintenance,
or unapproved
modifications.
You are responsible
for presenting your engine/equipment
to a B&S distribution
center, servicing
dealer, or other equivalent
entity, as applicable,
as soon as a
problem exists. The warranty repairs should be completed
in a reasonable
amount of
time, not to exceed 30 days. If you have any questions
regarding your warranty
rights and responsibilities,
you should contact B&S at 1-800-444-7774
(in USA) or
BRIGGSandSTRATTON.COM.
The following
are specific provisions
relative to your Emissions
Control Warranty
Coverage.
It is in addition to the B&S engine warranty for non-regulated
engines found in the
Operator's
Manual.
1.
Warranted
Emissions
Parts
Coverage under this warranty extends only to the parts listed below (the emissions
control systems parts) to the extent these parts were present on the B&S engine
and/or B&S supplied fuel system.
a.
Fuel Metering System
Cold start enrichment
system (soft choke)
Carburetor
and internal parts
Fuel pump
Fuel line, fuel line fittings, clamps
Fuel tank, cap and tether
Carbon canister
b.
Air Induction System
Air cleaner
Intake manifold
Purge and vent line
c.
Ignition System
Spark plug(s)
Magneto ignition system
d.
Catalyst System
Catalytic converter
Exhaust manifold
Air injection system or pulse valve
e.
Miscellaneous
Items Used in Above Systems
Vacuum, temperature,
position, time sensitive valves and switches
Connectors
and assemblies
2.
Length of Coverage
For a period of two years from date of original purchase*, B&S warrants to the
original purchaser and each subsequent
purchaser that the engine is designed, built,
and equipped so as to conform with all applicable regulations adopted by the Air
Resources
Board; that it is free from defects in material and workmanship
that could
cause the failure of a warranted part; and that it is identical in all material respects to
the engine described in the manufacturer's
application for certification. The warranty
period begins on the date the engine is originally purchased.
*
Two years or for the time period listed in the respective
engine or product
warranty statement,
whichever
is greater.
3,
4,
The warranty on emissions-related
parts is as follows:
Any warranted
part that is not scheduled
for replacement
as required
maintenance
in the owner's
manual supplied,
is warranted
for the warranty
period stated above. If any such part fails during the period of warranty
coverage, the part will be repaired or replaced by B&S at no charge to the
owner. Any such part repaired or replaced under the warranty will be warranted
for the remaining warranty
period.
Any warranted
part that is scheduled
only for regular inspection
in the owner's
manual supplied, is warranted
for the warranty period stated above. Any such
part repaired or replaced under warranty
will be warranted
for the remaining
warranty period.
Any warranted
part that is scheduled
for replacement
as required maintenance
in the owner's manual supplied,
is warranted
for the period of time prior to the
first scheduled
replacement
point for that part. If the part fails prior to the first
scheduled
replacement,
the part will be repaired or replaced by B&S at no
charge to the owner. Any such part repaired or replaced under warranty will be
warranted
for the remainder
of the period prior to the first scheduled
replacement
point for the part.
Add on or modified
parts that are not exempted
by the Air Resources
Board
may not be used. The use of any non exempted add on or modified parts by the
owner will be grounds for disallowing
a warranty claim. The manufacturer
will
not be liable to warrant failures of warranted
parts caused by the use of a non
exempted
add on or modified part.
Consequential
Coverage
Coverage shall extend to the failure of any engine components
caused by the
failure of any warranted
emissions
parts.
Claims and Coverage Exclusions
Warranty
claims shall be filed according to the provisions
of the B&S engine
warranty
policy. Warranty coverage
does not apply to failures of emissions
parts
that are not original equipment
B&S parts or to parts that fail due to abuse, neglect,
or improper
maintenance
as set forth in the B&S engine warranty
policy. B&S is not
liable for warranty coverage
of failures of emissions
parts caused by the use of
add-on or modified parts.
Engines that are certified to meet the California Air Resources
Board (CARB) small
off-road Emissions
Standard must display information
regarding the Emissions
Durability
Period and the Air Index. Briggs & Stratton makes this information
available
to the
consumer
on our emissions
labels. The engine emissions
label will indicate certification
information.
The Emissions
Durability
Period describes
the number of hours of actual running time
for which the engine is certified to be emissions
compliant,
assuming
proper
maintenance
in accordance
with the Operating
& Maintenance
Instructions.
The
following categories
are used:
Moderate:
Engine is certified to be emissions
compliant
for 125 hours of actual engine running time.
Intermediate:
Engine is certified to be emissions
compliant
for 250 hours of actual engine running time.
Extended:
Engine is certified to be emissions
compliant
for 500 hours of actual engine running time.
For example, a typical walk-behind
lawn mower is used 20 to 25 hours per year.
Therefore,
the Emissions
Durability
Period of an engine with an intermediate
rating
would equate to 10 to 12 years,
Briggs & Stratton engines are certified to meet the United States Environmental
Protection Agency (USEPA) Phase 2 or Phase 3 emissions
standards. The Emissions
Compliance
Period referred to on the Emissions
Compliance
label indicates the number
of operating hours for which the engine has been shown to meet Federal emissions
requirements.
For engines less than 225 cc displacement.
Category C = 125 hours, Category B = 250 hours, Category A = 500 hours
For engines of 225 cc or more displacement.
Category C = 250 hours, Category B = 500 hours, Category A = 1000 hours
11

Advertisement

loading

This manual is also suitable for:

Vanguard 610000