Configuring Remote Dial-In; Dial-In Configuration - Compaq AlphaServer GS80 User Manual
Hide thumbs
Also See for AlphaServer GS80:
- User manual (234 pages) ,
- Site preparation manual (34 pages) ,
- Installation and user manual (290 pages)
Table of Contents
Advertisement
8.7.5
Configuring Remote Dial-In
Before you can dial in through the SCM modem port or enable the
system to call out in response to system alerts, you must configure the
system for remote dial-in.
Example 8–1 Dial-In Configuration
SCM_E0> enable remote
SCM_E0> set password wffirmware
SCM_E0> set init ate0v0&c1s0=2
SCM_E0> init
Querying the modem port...modem detected
Initializing modem...passed
Modem port initialized
SCM_E0>
NOTE: The following modems require the initialization strings shown here.
For other modems, see your modem documentation.
Modem
Compaq Microcom 510 (North America)
3Com U. S. Robotics Courier
V.Everything/56K (North America and Japan)
Hayes Accura (North America)
AIWA PV-BW5610 56K V.90 & K56flex
Data/Fax Modem (Japan)
OMRON ME5614D (Japan)
MultiTech MT5600ZDX (North America)
MultiTech MT5600ZDXe (Europe)
8-24
AlphaServer GS80/160/320 User's Guide
–
—
˜
™
š
Initialization String
Ate0v0&c1s0=2
Ate0v0&c1s0=2
Ate0v0&c1&k3s0=2
Ate0v0&c1s0=2
Ate0v0&c1s0=2
Ate0v0&c1s0=2
Advertisement
Table of Contents
