Powering Up The System; Scm Power-Up Display - Compaq AlphaServer GS80 User Manual

6.1

Powering Up the System

To power up the system, set the keyswitch to On, or power up the
system remotely. The SCM power-up display is shown at the system
management console and the control panel, followed by the SRM
power-up display.
6.1.1

SCM Power-Up Display

Example 6–1 SCM Power-Up Display
SCM_E0> power on
Powering on PCI Box 0
Powering on PCI Box 1
QBB-0 Powering ON
~I~ Testing OCP Switch passed
Power ON Phase INIT
QBB-1 Powering ON
QBB-2 Powering ON
QBB-3 Powering ON
SCM_E0>
Testing SIO Shared RAM(please wait)
Initializing shared ram
Shared RAM Initialized
Powering ON H-Switch
SCM_E0>
I~ HSW4/HPM40 SysEvent: HS_INIT_CD1
Phase 0
I~ Enable HS Links: 0f
~I~ QbbConf(gp/io/c/m)=fbbfffff Assign=ff SQbb0=00 PQbb=00 SoftQbbId=fedcba98
~I~ SysConfig: 37 13
SCM_E0>
I~ HSW4/HPM40 SysEvent: LINK0_ON
SCM_E0>
I~ HSW4/HPM40 SysEvent: LINK1_ON
SCM_E0>
I~ HSW4/HPM40 SysEvent: LINK2_ON
SCM_E0>
I~ HSW4/HPM40 SysEvent: LINK3_ON
SCM_E0>
.............................................................................
.........................................................................
SCM_E0> ......................................
6-2 AlphaServer GS80/160/320 User's Guide
07 19 07 12 c7 13 37 13
Reg0:000F Reg1:AB81
f7 11 f7 13 37 13
Reg0:000F Reg1:AB81
Reg0:010F Reg1:AB81
Reg0:030F Reg1:AB81
Reg0:070F Reg1:AB81
–
—
˜