Table of Contents
Advertisement
2.
Expand Utilities -> Altos R920 -> Integrated SAS hardware
RAID, select RAID Web Console 2 (Windows) and click on
Setup.
3.
Follow the instruction and use the default setting to
complete the RAID Utility Installation.
Network Utility Installation
The PROSet utility for the onboard Gigabit Ethernet
controller will be installed automatically when you
installing the onboard Gigabit Ethernet driver.
Windows Server 2008 Enterprise Edition (with Integrated
SAS Hardware RAID)
Below information describes how to manually install Windows
Server 2008 Enterprise Edition on Altos R920 with integrated
SAS hardware RAID.
BIOS Required
Altos R920 BIOS
23
(or later) are required to support Windows Server 2008.
Drivers Required
For Windows Server 2008 Installation, the following device
drivers are required.
Device
Onboard VGA
Onboard Chipset
Integrated SAS
hardware RAID
Onboard Gigabit
Ethernet
Add-on Gigabit
Ethernet on I/O
expansion
module
Trusted
Platform Module
IOAT
SAS Hot-swap
backplane
11
(or later), BMC
17
Version
8.240.50.30
EasyBUILD 8.0 build 200 (or
00
later)
EasyBUILD 8.0 build 200 (or
8.6.1.1001
later)
EasyBUILD 8.0 build 200 (or
2.20.0.32
later)
EasyBUILD 8.0 build 200 (or
9.12.17.0
later)
EasyBUILD 8.0 build 200 (or
10.2.28.0
later)
N/A
OS built-in
EasyBUILD 8.0 build 200 (or
1.2.79.9
later)
N/A
OS built-in
Installation Configuration Guide
(or later) and FRUSDR
EasyBUILD Version
Altos R920
14
Advertisement
Table of Contents
