Setting Est. Time Display - Alpine NVD-A111 SMART MAP PRO Owner's Manual

Setting Est. (Estimated) Time display
When the system calculates a route, it also estimates the time it will take to arrive at the
destination. It will display this estimate as either "AT" or Arrival Time, or "TO GO," the time
remaining to reach the destination. These estimates are displayed under the Direction/Distance
display at the right of the Guidance or Map displays.
1
Press the MENU button to display the
main menu bar. Select Setup from the
main menu and press ENTER. The
Setup menu appears.
Select Guidance from the Setup menu
and press ENTER.
2
Highlight Est. Time to Dest. and press
ENTER.
Choose Arrival or Remaining and press
ENTER to store your selection (in this
case, Arrival).
Note: The time estimates are based on the
average speed of the vehicle. The Est. Time will
vary accordingly, as the vehicles speed varies.
3
Press the MP/RG button.
The system returns to the Detailed Map
display.
62
Setup
ENTER
Guidance
ENTER
Est. Time to Dest.
ENTER
Arrival
ENTER
MP/RG