Error Messages - Alpine NVD-A111 SMART MAP PRO Owner's Manual

Error messages

Various messages are displayed on the screen during operation. In addition to the messages
telling you the current status or providing guidance for the next maneuver, the following error
messages may appear. If one of these error messages is displayed, carefully follow the instructions
in the solution column.
Message
Please insert
DVD-ROM/map
data disk.
DVD ROM
unreadable.
Please check
DVD ROM.
DVD ROM being
checked.
Menu
inoperable while
driving.
Cautiously bring
vehicle to a stop
at a safe place
and set panking
brake before
using this
function.
If you are
driving, pull over
to use this
function. OK/NO
Roads can't be
found in area.
Please near the
main road.
78
Cause
• The disc has been removed.
• There was no disc in the system
when the power was switched on.
• A disc that the system cannot read
has been loaded.
• The disc is dirty or upside down.
• The disc cannot be read because of
condensation.
• A disc was just inserted.
• Vibration or the like made it
impossible to read the disc.
• The MENU button was pressed
while the vehicle was running.
• A menu selection operation was
carried out while the vehicle was
running.
• The MENU button was pressed
while the vehicle was running.
• A menu selection operation was
carried out while the vehicle was
running.
• When the destination or waypoint
was specified, there was no road in
the area, so no route could be
found.
• An attempt was made to erase a
waypoint even though no waypoint
is set.
Solution
Insert the disc.
Insert the map disc.
Take out the disc, check if it was
upside down, clean it if necessary,
then re-insert it.
Take out the disc, allow enough time
for condensation to evaporate (about
1 hour), then re-insert the disc.
When the disc check is complete, the
following screen is displayed
automatically.
Move the vehicle to a safe location,
stop, and engage the parking brake,
then carry out this operation.
Move the vehicle to a safe location,
stop, and engage the parking brake,
then carry out this operation.
Focus on a nearby major road, then
specify the destination or waypoint
again.
This message simply announces that
no waypoint is set. The message
goes out soon.