Manual Backup - Alpine NVD-A111 SMART MAP PRO Owner's Manual

Manual backup

The navigation system will automatically back up (save) your new settings (for example, address
book settings etc.) when the ignition switch is turned off and turned on again. If the battery leads
should be disconnected from the vehicle's battery, be sure to manually back up your new settings
before disconnecting the battery leads as described below.
1
Press the MENU button to display the
main menu bar. Select Setup and press
ENTER. The Setup Menu appears.
Select System Calibration and press
ENTER.
2
Highlight System Back Up and press
ENTER.
3
The User Memory Backup screen
appears. If you would like to save your
settings to Flash ROM, select "Yes" and
press ENTER.
4
The navigation system begins the
backup process and the display darkens.
Once the backup process is complete,
the opening screen will appear.
ENTER
Set up
ENTER
System Calibration
ENTER
System Backup
ENTER
Yes
Continued next page
15