About The Adjustment Of Guide Display On/ Off Setting And Adjustment Of Caution Display Location; Side Camera Operation; Displaying The Side Camera Image From The Menu Screen; Switching The Image Pattern For The Side Camera - Alpine X409 Owner's Manual

About the adjustment of guide display ON/
OFF setting and adjustment of Caution
display location
As with the rear camera, the front camera guide display ON/OFF setting
and Caution display location can be adjusted. See "Guide Display ON/
OFF Setting" (page 87) and "Adjusting the Caution Display Location"
(page 88) for the operations.

Side Camera Operation

Displaying the Side Camera image from the
Menu screen.
1
Press the MENU button.
The menu screen is displayed.
[Camera] button
2
Touch [Camera].
The Side Camera view is displayed.
• Touch the screen while the camera image is being displayed, and touch
[ ] or [ ] to return to the main source screen or previous screen.
• You can perform a Guide Adjustment. For details, see "Adjusting the
Rear/Front/Side Camera Guide" (page 45).
• If you connect a Side Camera using the optional Multi Camera
Interface module, you can display the Side camera image using the
[Camera] button only when you set "Setting a Default Camera"
(page 47) to "Side". If you connect a Rear Camera and Front Camera at
the same time, touch [Rear] or [Front] in the Rear Camera image to
switch the Camera image.
Switching the Image Pattern for the Side
Camera
If the camera has a view switch function, the Direct Change switch is
displayed.
1
Touch the screen when the image from the side camera
is displayed.
The operation screen is displayed on the screen.
• After a 5-second time-out, the operation screen returns to the
camera display screen.
90
-EN
2
Touch [Rear] or [Front].
The image pattern changes.
Rear: Vehicle Rear view
Front: Vehicle Front view
• For detailed information about image patterns, see the camera Owner's
Manual.
• You can perform a Guide Adjustment. For details, see "Adjusting the
Rear/Front/Side Camera Guide" (page 45).

Off-Road Camera Operation (X409 only)

When Off-Road Mode is On, Off-Road Camera can be activated.

Off-Road Rear Camera Operation

Displaying the Off-Road Rear Camera screen
1
Press the MENU button.
[Camera] button
2
Touch [Camera].
The Off-Road Camera screen is display.
• You can activate Off-Road Camera by pressing the [Source/
Camera View] button once. This requires "Off-Road SWRC" to be
set to "Camera". For details, see "Off-Road SWRC Settings (X409
only)" (page 40).
• If you connect an optional Multi Camera Interface module, when
the gear lever is shifted to the reverse (R) position and the reverse
image is displayed, you can touch [CAM]/[VIEW] to switch
camera or image pattern.
Multi-view camera display example