Video Set Menu - Sony PMW-EX30 Operating Instructions Manual

Menu items
Audio Output
Setting for audio
outputs

VIDEO SET menu

Menu items
HDMI/CMPNT/SDI
Out SEL
Setting the HDMI/
component/SDI
outputs
The setting value in
parentheses is
displayed when
PAL format is
selected (when
"Country" is set to
"PAL Area").
Subitems and
setting values
Monitor CH
CH-1 / CH-2
(CH-3 / CH-4)
CH-1+CH-2
(CH-3+CH-4)
CH-1 (CH-3)
CH-2 (CH-4)
Output CH
CH-1,CH-2
CH-3,CH-4
Subitems and
setting values
1080i/720P
1080i
480i (576i)
480P (576P)
Description
Select the audio channel(s) to be output to
the headphones or the speaker.
CH-1/CH-2 (CH-3/CH-4): Stereo
CH-1+CH-2 (CH-3+CH-4): Mix
CH-1 (CH-3): CH-1 (CH-3) only
CH-2 (CH-4): CH-2 (CH-4) only
The "Output CH" setting determines which
pair of channels (CH-1 and CH-2 or CH-3
and CH-4) is used.
Select audio channels to be output through
the AUIDO OUTPUT CH-1/3 and CH-2/4
connectors, the headphones, or the HDMI
connector from either channels 1 and 2 or
channels 3 and 4.
Notes
• This item is disabled (displayed in grey)
when this unit is in recording or E-E mode
with the VIDEO INPUT switch set to HD
SDI or SG.
• Set this item to "CH-1,CH-2" when i.LINK
input is selected.
Description
Select the signals to be output from the
HDMI, COMPONENT and HD/SD SDI
OUTPUT connectors.
1080i/720P: HD signal recorded or played
back
1080i: 1080i signal (or 720P signal
converted to 1080i signal)
480i (576i): Down-converted SD signal
480P (576P): Down-converted SD
progressive signal
Note
This item is disabled (displayed in grey) and
the setting value is fixed to 480i (576i) when
the "i.LINK I/O Select" setting is "DVCAM".
Setup Menu List 87