Recording Shot Marks - Sony PMW-EX30 Operating Instructions Manual

To check the status during recording
Press the DISPLAY button.
For details on each indication displayed, see
3
" LCD display" (see page 18).
To stop recording
Press the STOP button.
Recording stops and this unit enters E-E
mode.
When you stop recording, video, audio and
subsidiary data from the start to end of the
recording are recorded as a single clip on an
SxS memory card.
For details on clips, see Chapter 4 "Clip
Operations" (page 52).

Recording shot marks

When you record shot marks for important
scenes as subsidiary data, you can access
the marked points easily on a Shot Mark
screen, which only displays scenes with
shot marks only. This increases editing
efficiency.
For the Shot Mark Screen, see "Displaying the
SHOT MARK screen" (page 62).
This unit allows you to record two types of
shot marks: shot mark 1 and shot mark 2.
Shot marks can be recorded as needed
during recording or can be added after
recording while checking the playback
pictures (see page 51).
To insert a shot mark during
recording
Use the IR remote commander.
1
Set "IR Remote" (see page 92) of the
OTHERS menu to "On" to activate the
IR remote commander.
2
Start recording and press the
SHOTMARK 1 or 2 button where you
wish to insert a shotmark.
SHOTMARK 1 button
SHOTMARK 2 button
A shot mark of the type corresponding
to the button you press is recorded.
PUSH SET
1 T
SHOTMARK ZOOM
2 W
THUMBNAIL SUB CLIP
PREV PLAY/PAUSE NEXT STOP
. u > x
Recording 49