Setting The Clock - Sony PMW-EX30 Operating Instructions Manual

Note
While the initial setting display is shown,
no other operation except turning the power
off is permitted until you finish the setting
for this display.
When the initial setting display is not
shown or the initial settings are completed,
the LCD display state varies as follows.
With no SxS memory card loaded: The
video selected with the VIDEO INPUT
switch is shown. If the selected video is
not input, a blue or black screen
appears.
With an accessible SxS memory card
loaded: Index frame images of the
clips recorded on the memory card are
shown as thumbnails (thumbnail
screen).
To turn the power off
Press the power button again.
The power indicator on the front panel
lights in red. (The unit enters the standby
state.) To exit the standby state, disconnect
the AC power source (see page 28).

Setting the Clock

When the initial setting display appears on
the LCD display, Set the date and time of
the built-in clock, using this display.
INITIAL SETTING
Time Zone: UTC +09:00 TOKYO
Date / Time: 2008/01/01 00:00:00
F i n i sh
Time Zone
The value shows the time difference from
UTC (Coordinated Universal Time).
Change the setting if needed (see page 28).
To set the time and date
MENU button
DISPLAY
1
REC LEVEL
CH-1
TC/UB
VIDEO INPUT
iLINK
HD SDI
SG
CH-2
AUDIO INPUT STATUS
ANALOG
HD SDI
CH-1/2
HD SDI
CH-3/4
F REV PREV NEXT F FWD PLAY/PAUSE STOP
PHONES PHONE LEVEL
m . > M
u x
TOP END
<, ,, M, m buttons
1
Press the M or m button to set the
cursor to "Date/Time" then press the
SET button.
The cursor moves to the year-setting
column.
INITIAL SETTING
Time Zone: UTC +09:00 TOKYO
2008/01/01 00:00:00 SET
Date / Time: 2007/01/01 00:00:00 SET
F i n i sh
SET button
MENU SET
ACCESS
A B
THUMBNAIL CANCEL
REC
SLOT
z
SELECT
CANCEL
button
Setting the Clock 29