Sony PMW-EX30 Operating Instructions Manual page 71

Solid state memory recorder
Hide thumbs Also See for PMW-EX30:
Table of Contents

Advertisement

3
With Windows, check that the memory
card is displayed as a removable disk
in My Computer.
With Macintosh, check that a "NO
NAME" or "Untitled" folder was
created on the desktop. (The folder
name can be changed as needed.)
If the result of checking is Yes, then it
indicates that the connections are
correct.
Note
The following operations must be
eliminated when the ACCESS lamp is lit in
red.
• Turning the power off or disconnecting
the power cord
• Removing the SxS memory card
• Disconnecting the USB cable
To remove an SxS memory
card (recognized as extended
drive)
For Windows
1
Click on the icon of "Safely Remove
Hardware" on the task bar of the
computer.
2
Select "Safely remove SxS Memory
Card - Drive (X:)" from the displayed
menu.
3
Check that the Safe To Remove
Hardware message appears then
remove the card.
For Macintosh
Drag the SxS memory card icon on the
desktop to Trash.
If the SxS memory card icon is located on
Finder, click on the eject icon on its side.
Note
Do not select "Card Power Off" from the
SxS memory card icon displayed on the
menu bar.
To use the XDCAM EX Clip
Browsing Software
To copy clips to the local disk of a
computer, the XDCAM EX Clip Browsing
Software must be used.
Install the XDCAM EX Clip Browsing
Software on the supplied CD-ROM to your
computer.
Although the data regarding recorded
materials are stored over multiple files and
folders, you can easily handle the clips
without considering such data and directory
structure by using the XDCAM EX Clip
Browsing Software.
Note
If you operate, e.g. copy the clips on the
SxS memory card by using the Explorer
(Windows) or Finder (Macintosh), the
subsidiary data contained by the clips may
not be maintained. To avoid such a
problem, use the XDCAM EX Clip
Browsing Software.
See "Using the CD-ROM" (page 13) for the
operating requirements, and refer to the User's
Guide contained in the CD-ROM.
For support information on the XDCAM EX Clip
Browsing Software, visit the web sites shown in
"XDCAM EX Clip Browsing Software" (page 14) or
on the cover page of the supplied CD-ROM.
Operating Clips with a Computer
71

Advertisement

Table of Contents
loading

Table of Contents