Sony PMW-EX30 Operating Instructions Manual page 84

Example: OTHERS menu
OTHERS
All Reset
Setup Data
Time Zone
00:00
Clock Set
Language
Hours Meter
Displayed when there are more menu
items beneath. (v shown at the top
indicates that there are more menu
items above.)
3
Press the M or m button to move the
cursor to the menu item you wish to
set, then press the SET button to
confirm the selection.
The setting area appears to the right of
the menu item selection area, and the
cursor moves to the top of its subitems.
TC/UB SET
B
Timecode
B
Users Bit
TC For mat :
00:00
Setting area
• The subitems and their
• To return to the previous
When you select an item without
subitems, that is, an item which is only
to be turned on and off or to be
switched between settings, the choices
are displayed to the right with the
cursor positioned on the currently
selected setting. In this case, proceed
to step 5.
84 Basic Menu Operations
B
: UTC +09:00
B
: English
B
V
Mode : Preset
Run : Rec Run
Setting : 00:00:00:00
DF
Reset
current values are
displayed.
layer, select or press
the CANCEL button.
Example
TC/UB SET
B
Timecode
B
Users Bit
TC For mat : DF
00:00
NDF
Choices
To return to the previous
layer, press the CANCEL
button.
4
For the item that has subitems, press
the M or m button to move the cursor to
the subitem you wish to set, then press
the SET button to confirm the
selection.
The available values of the selected
subitems are displayed, and the cursor
moves to the current value.
TC/UB SET
B
Timecode Mode
Users Bit B Run
TC For mat : DF Setting
00:00
Reset
Available value area
To return to the previous
layer, press the CANCEL
button.
• The available value area can show
seven lines at maximum. When all
the selectable values cannot be
displayed at one time, you can scroll
the display up or down by moving
the cursor. A triangle appears at the
upper or lower right corner of the
available value area to indicate that
scrolling is enabled (see the figure in
step 3).
• For items having a wide range of
available values (example: –99 to
+99), the available value area is not
displayed. The current setting is
highlighted instead, indicating that
the setting is ready for change.
: Preset
: Rec Run
: Free Run 00