Connections And Settings; Connections For Content Browser And Non-Sony Nonlinear Editors - Sony PMW-1000 Operation Manual

Connections and
Settings
Note
Production of some of the peripherals and related devices
described in this chapter has been discontinued.
For advice about choosing devices, please contact your
Sony dealer or a Sony representative.
Connections for Content Browser
and non-Sony nonlinear editors
When using Content Browser, you can have a remote
access to this unit from a network connected computer.
You can also access to this unit from a nonlinear editor that
is not a Sony product via FTP/CIFS, and use this unit as a
material server.
For an overview and installation of Content Browser,
access the Sony website closest to your area.
Using the (network) connector (FTP
connection)
The following shows an example of an FTP (File Transfer
Protocol) connection.
Note
The PMW-1000 IP address and other network-related
settings are required for connection.
For details of the network-related settings, refer to the
Maintenance Manual.
Connecting this unit directly to a laptop computer
PMW-1000 (this unit)
To (network) connector
Network cable (not supplied)
Settings on this unit
Remote control switch: NET (see page 10)
Setup menu item 257 NETWORK ENABLE: net
Connecting three PMW-1000 units to a laptop
computer via a LAN
CAUTION
When you connect the Network cable of the unit to
peripheral device, use a shielded-type cable to prevent
malfunction due to radiation noise.
Settings on all PMW-1000
Remote control switch: NET (see page 10)
Setup menu item 257 NETWORK ENABLE: net
Laptop computer
PMW-1000
To (network)
connector
Laptop computer
Network cable
(not supplied)
23

Connections and Settings