Sony PMW-1000 Operation Manual page 11

PB: Adjust the playback audio levels. The input audio
levels are fixed at their preset values.
3 Arrow buttons
The four arrow buttons are also used as the MARK1
button, MARK2 button, IN button, and OUT button. The
correspondence with these buttons is as follows.
V button: MARK1 button
v button: MARK2 button
B button: IN button
b button: OUT button
You can use these buttons for thumbnail selection, menu
setting operations, setting IN/OUT points, and so on.
1 V/MARK1 button and v/MARK2 button
2 IN indicator and OUT indicator
MARK1
IN OUT
3 B/IN button and b/OUT button
MARK2
L/JOG
a V/MARK1 button and v/MARK2 button
When the the clip list screen is shown on the display, you
can use these for thumbnail selection.
During recording or playback, a shot mark 1 or shot mark
2 is recorded as an essence mark when you press the PUSH
SET knob with the V/MARK1 or v/MARK2 button held
down.
Essence marks can also be deleted from the Thumbnail
Menu of the chapter thumbnail screen (see page 58)
b IN indicator and OUT indicator
Light or flash as follows when you set IN and OUT points
in the clip to copy only the part defined by the IN and OUT
points (see page 49).
IN indicator: When an IN point is set, this lights. If an
attempt is made to set the IN point after a recorded
OUT point, this flashes.
OUT indicator: When an OUT point is set, this lights. If
an attempt is made to set the OUT point before a
recorded IN point, this flashes.
c B/IN button and b/OUT button
When the the clip list screen is shown on the display, you
can use these for thumbnail selection.
An IN or OUT point is set when you press the PUSH SET
knob with the B/IN or b/OUT button held down. The IN
or OUT point setting is deleted when you press the
RESET/RETURN button with the B/IN or b/OUT button
held down.
4 Shuttle/jog/variable control section
SHTL/JOG button
VAR/JOG button
SHTL/JOG
VAR/JOG
RESET
RETURN
For details of playback operations with these buttons and
dials, see "Playback operation" on page 45.
5 Display/menu control section
5 RESET/RETURN button
4 MENU button
3 PUSH SET knob
1 Function buttons (F1 to F6)
2 Display
6 COPY button
7 THUMBNAIL button and indicator
8 DISPLAY button
9 SHIFT button
0 PAGE/HOME button
a Function buttons (F1 to F6)
These buttons are enabled when the function menu (see
page 34) is visible. Each press of a button changes the
setting of the corresponding item in the menu.
For convenience, this manual refers to these buttons as
buttons F1 to F6, in order from the top.
b Display
Displays menus, audio level meters, and data such as time
data or clip information. The DISPLAY button lets you
switch to the video monitor display.
For details, see "Display screen" on page 13.
Jog/shuttle transport indicators
Shuttle dial
Jog dial
Front Panel
11