Sony PMW-1000 Operation Manual page 75

Item number Item name
028 HD CHARACTER
Sub-item
1 HD-SDI2
2 HDMI
029 STORED OWNERSHIP
031 RECORDING FORMAT
033 BATTERY END VOLTAGE
036 FILE NAMING
Sub-item
1 PREFIX
2 NUMERIC
B01 RECALL SETUP BANK-1
B02 RECALL SETUP BANK-2
B03 RECALL SETUP BANK-3
B11 SAVE SETUP BANK-1
B12 SAVE SETUP BANK-2
B13 SAVE SETUP BANK-3
B20 RESET SETUP MENU
a) Not displayed when the unit is in 23.98P mode.
b) Not displayed when the unit is in 59.94P/50P mode.
Settings
Specify whether to superimpose text information on the HD video signal.
Specify whether to superimpose text information on the video signal output
from the HDSDI OUTPUT 2 (SUPER) connector.
off:Do not superimpose.
on: Superimpose.
Specify whether to superimpose text information on the video signal output
from the HDMI OUT connector when the HDMI output is the same with the SDI
output.
off: Do not superimpose.
on: Superimpose.
Specify whether to enable changing UMID ownership information settings
(COUNTRY, ORGANIZATION and USER).
off: Do not enable.
on: Enable.
See "Using UMID Data" (page 102) for more information about UMID.
Set the recording format.
AI422: XAVC Intra 1920×1080 422
HD422: HD422
HD420 HQ [420HQ]: HD420 HQ
HD420 HQ1920 [HQ192]: HD420 HQ1920
a)
DVCAM: DVCAM
Sets the voltage to shut down the unit in the battery operation. The battery
near end indicator flashes at +0.7 V of the set voltage.
10.5V to 13.5V: 10.5 V to 13.5 V in 0.5 V unit.
Set the clip name to be assigned to a clip to record.
Set the prefix of the clip name (up to 10 characters). The allowable characters
are alphanumeric characters, symbols (! # $ % & ' ( ) + , - . ; = @ [ ] ^ _ { } ~),
and the space character.
CLIP
Set the initial value of the numeric part (00001 to 99999, five-digit serial
number) of the clip name.
00001
Set to "on" to recall menu bank 1 to replace the current menu settings.
Set to "on" to recall menu bank 2 to replace the current menu settings.
Set to "on" to recall menu bank 3 to replace the current menu settings.
Set to "on" to save current menu settings to menu bank 1.
Set to "on" to save current menu settings to menu bank 2.
Set to "on" to save current menu settings to menu bank 3.
Set to "on" to return the settings of the current menu to the factory default
settings.
b)
b)
75
Setup Menu