Status Display; Status Display Area - Sony PMW-1000 Operation Manual

f Clip information
Displays clip information.
Clip number/total number of clips
Clip name
Clip format
(Codec, video format, System
frequency,Audio format)
g Status display
Displays icons indicating the status of this unit.
Icon Description
Currently set to the repeat playback mode
Currently set to the single clip playback mode
Currently set to the single clip playback mode
with the repeat playback mode
1080/720 cross-convert output
Recording
h Time data display area
A Remaining media capacity for recording or playback
B REC RUN/FREE RUN
C Timecode generator mode
D VITC
F Time data
E Time data type
A Remaining media capacity for recording or
playback: Displays the amount of remaining capacity
for recording or playback on the media.
B REC RUN/FREE RUN: Displays the timecode run
mode. The run mode is set with RUN MODE on page
P4 TC of the function menu (see page 36).
C Timecode generator mode: Displays the timecode
source and generation method (preset or regenerate).
These are set with TCG and PRST/RGN on page P4
TC of the function menu (see page 36).
Duration
G DF/NDF
indication
G DF/NDF
(TCG)
indication
(TCR)
D VITC: Lights in the following cases.
• When VITC is read in playback mode. (This has no
relations to the display in the time data display
area.)
• When VITC recording is possible.
E Time data type: Displays the type of time data
displayed in the time data display area. The type of
time data is selected with CNTR SEL on the HOME
page of the function menu (see page 34).
Display Type of time data
TC Timecode
COUNTER Elapsed recording/playback time
UB User bits
VITC VITC
VIUB VIUB
TCG Timecode generator value
UBG User bits generator value
F Time data: Normally displays timecode or VITC,
according to the selection made with TCR on page P4
TC of the function menu.
In Pre-read edit mode, the display is presented on 2
rows, with "PREREAD" appearing in the bottom row.
G DF/NDF indication: Displays the frame count mode
for the internal timecode reader (TCR) and internal
timecode generator (TCG). The frame count mode is
set with DF/NDF on page P4 TC of the function menu
(see page 36).
Display Frame count mode
. DF (drop-frame mode)
: NDF (non-drop-frame mode)
i Status display area
A Error, warning, and alarm messages
C Copy icon
D Network connection display
E Network remote connection display
F Menu setting status
G Power source display
A Error, warning, and alarm messages: Messages
about operations and the status of the unit appear here.
The seriousness of the message is indicated by the
color, as follows.
Red: Error message (flashing)
Orange: Warning message
White: Alarm message
B Delete icon
Front Panel
15