Items In The Basic Menu - Sony PMW-1000 Operation Manual

Item group Function
Items Settings relating to control
100 to 199 panels
Items Settings relating to the remote
200 to 299 control interface
Items Settings relating to editing
300 to 399 operations
Items Settings relating to the
600 to 649 timecode generator

Items in the basic menu

The basic menu items (excluding the items related to the
operating hours meter) are listed in the following table.
Item number Item name
002 CHARACTER H-POSITION
003 CHARACTER V-POSITION
005 DISPLAY INFORMATION
SELECT
Item group
Refer to
Items
page 79
650 to 699
Items
page 80
700 to 799
Items
page 80
800 to 899
Items
page 81
900 to 999
• The values in the "Settings" column are the values that
appear in settings screens. The values in brackets [ ] are
the value shown in menu screens (when they differ from
the values shown in settings screens).
• The underlined values are the factory defaults.
Settings
Adjust the horizontal screen position (as a hexadecimal value) of the text
information output from the COMPOSITE OUTPUT 2 (SUPER), SDSDI
OUTPUT 2 (SUPER), HDSDI OUTPUT 2 (SUPER), or HDMI OUT connector
for superimposed display on the monitor. The hexadecimal value 00 is for the
far left of the screen. Increasing the value moves the position of the characters
to the right.
00 to 0C to 28 (When the number of system lines is 1080 and the system
frequency is 59.94i, 29.97P, 50i, 25P, or 23.98P)
00 to 0B to 28 (When the number of system lines is 720 and the system
frequency is 59.94P or 50P)
Set this item by adjusting to the required position while viewing the monitor.
Adjust the vertical screen position (as a hexadecimal value) of the text
information output from the COMPOSITE OUTPUT 2 (SUPER), SDSDI
OUTPUT 2 (SUPER), HDSDI OUTPUT 2 (SUPER), or HDMI OUT connector
for superimposed display on the monitor. The hexadecimal value 00 is for the
top of the screen. Increasing the value lowers the position of the characters.
00 to 2A to 32 (When the number of system lines is 1080 and the system
frequency is 59.94i, 29.97P, 50i, 25P, or 23.98P)
00 to 29 to 32 (When the number of system lines is 720 and the system
frequency is 59.94P or 50P)
Set this item by adjusting to the required position while viewing the monitor.
Determine the kind of text information to be output from the COMPOSITE
OUTPUT 2 (SUPER), SDSDI OUTPUT 2 (SUPER), HDSDI OUTPUT 2
(SUPER), or HDMI OUT connector.
time data & status [T&sta]: Time data and the units status.
time data & UB [T&UB]: Time data and user bits data. (When "UB" (user bits
data) is selected with CNTR SEL on the HOME page of the function
menu, the "user bits data" and "time data" arranged in that order are
displayed.)
time data & CNT [T&CNT]: Time data and counter count. (When "COUNTER"
is selected with CNTR SEL on the HOME page of the function menu, the
counter count and time data arranged in that order are displayed.)
time data & timecode [T&T]: Time data and timecode (TC or VITC)
time data only [time]: Time data only
Function
Settings relating to the
metadata
Settings relating to video
control
Settings relating to audio
control
Settings relating to digital
processing
Refer to
page 82
page 83
page 85
page 86
73
Setup Menu