Sony PMW-1000 Operation Manual page 74

Item number Item name
006 LOCAL FUNCTION ENABLE
009 CHARACTER TYPE
011 CHARACTER V-SIZE
013 SYSTEM FREQUENCY
SELECT MENU
027 SD CHARACTER
Sub-item
1 SD-SDI2
2 COMPOSITE2
3 LCD
74
Setup Menu
Settings
Determine which recording and playback control buttons on the front panel are
enabled when this unit is controlled from external equipment.
all disable [dis]: All buttons and switches are disabled.
stop & eject [st&ej]: Only the STOP button can operate.
all enable [ena]: All buttons and switches are enabled.
Determine the type of characters such as timecode output from the
COMPOSITE OUTPUT 2 (SUPER), SDSDI OUTPUT 2 (SUPER), HDSDI
OUTPUT 2 (SUPER), or HDMI OUT connector for superimposed display on
the monitor.
white: White letters on a black background
black: Black letters on a white background
white/outline [W/out]: White letters with black outline
black/outline [B/out]: Black letters with white outline
Determine the vertical size of characters such as timecode output from the
COMPOSITE OUTPUT 2 (SUPER), SDSDI OUTPUT 2 (SUPER), HDSDI
OUTPUT 2 (SUPER), or HDMI OUT connector for superimposed display on
the monitor.
×1
: Standard size
×2: 2 times standard size
Set this item by selecting the required size while viewing the monitor.
Specify whether to enable switching the system frequencies.
off: Do not enable switching the system frequencies.
on: Enable switching the system frequencies.
You can switch between the following frequencies.
1080/59.94i, 50i, 29.97P, 25P, 23.98P, 720/59.94P, 50P
For details about switching the system frequencies, see page 30.
Note
Settings for both basic and extended menu items are saved separately for
different system frequencies.
• 1080 59.94i/29.97P
• 1080 50i/25P
• 1080 23.98P
• 720 59.94P
• 720 50P
Therefore, when you switch system frequencies, all menu items are reset to
the current settings for the new mode. (They are different from the setting for
the previous mode.)
Specify whether to superimpose text information on the SD video signal.
a)
Specify whether to superimpose text information on the video signal output
from the SDSDI OUTPUT 2 (SUPER) connector.
off: Do not superimpose.
on: Superimpose.
a)
Specify whether to superimpose text information on the video signal output
from the COMPOSITE OUTPUT 2 (SUPER).
off: Do not superimpose.
on: Superimpose.
Specify whether to superimpose text information over the display on the front
panel.
off: Do not superimpose.
on: Superimpose.