Clip Operations; Selecting Clips; Searching With Thumbnails - Sony PMW-1000 Operation Manual

For the procedure for creating EDLs, see "Creating and
editing EDLs" (page 61).
P2 OTHER page
Item Function
F1: USB DRV When an external storage is connected to
this unit, executes USB drive mounting or
dismounting.
ON: The USB drive is mounted.
OFF: The USB drive is not mounted.
F2: SELECT When the USB drive has been mounted
FOLDER with an external storage connected to this
unit, displays a list of folders existing in
the USB drive.
To display the Clip F Menu
Press the PAGE/HOME button or function buttons (F1 to
F6) with a clip list screen (thumbnails view or details view)
displayed.
To display a different page
Each press of the PAGE/HOME button displays the next
function menu page in the order: CLIP t P1 t P2 t
CLIP...

Clip Operations

Selecting clips

Select clips with the selection frame (see page 52).
To move the selection frame
Do one of the following.
• Turn the PUSH SET knob.
• Press the arrow buttons.
• Turn the shuttle/jog dial. (The selection frame moves at
high speed in shuttle mode and at low speed in jog
mode.)
To jump to the first clip
Press the PREV button while holding down the SHIFT
button.
To jump to the last clip
Press the NEXT button while holding down the SHIFT
button.
To make a continuous selection of clips
Move the selection frame to the first clip that you want to
select. Then, while holding down the SHIFT button, turn
the PUSH SET knob.
To cancel the continuous selection, move the selection
frame without the SHIFT button held down.

Searching with thumbnails

You can put the clip list screen into thumbnails view (see
page 52) to search for desired clips while viewing
thumbnails.
To search for clips while viewing clip names, press the
DISPLAY button to switch to details view (see page 52).
To search through a clip in the expand
thumbnail screen
The expand function allows you to divide a clip selected in
the clip list screen into equally sized blocks, and to display
a list of thumbnails of those blocks. This is a quick and
efficient way to review the selected clip and search for
target scenes. You can specify 12, 144, or 1728 divisions.
57
Clip Operations