Chapter 2 Names And Functions Of Parts; Front Panel - Sony PMW-1000 Operation Manual

Names and Functions of
Parts

Front Panel

The names and symbols of buttons and knobs on the front
panel are color coded according to function.
White: Function when the button or knob is operated
independently.
1 On/standby button and
indicator
2 Audio level adjustment
section (see page 10)
2 Remote control switch
3 KEY INHI switch
4 PHONES jack
5 LEVEL adjustment knob
6 Super Speed USB connector
6 Recording and playback control section (see page 12)
a On/standby (1) button and indicator
When the POWER switch on the rear panel is in the @ (on)
position, or when DC power is connected to the DC IN
12V connector on the rear panel, this switches the unit
between the operating state (the indicator is lit green) and
the standby state (the indicator is lit red).
When you press this button with the indicator lit red and
holding it down for a short time (0.25 seconds or longer),
the indicator changes to lit green, and the unit enters the
operating state.
Chapter
Orange: Function when the button is operated with the
SHIFT button held down.
Blue: Function related to thumbnail operations.
When you press this button with the indicator lit green and
holding it down for a longer time (1 second or longer), the
indicator changes to flashing green and then lit red, and the
unit enters the standby state.
When using this unit, normally leave the rear panel
POWER switch in the @ position, and use this button to
switch the unit between the operating state and standby
state.
2
Handle
1 Memory card slots
(see page 10)
3 Arrow buttons
(see page 11)
4 Shuttle/jog/variable
control section (see
page 11)
5 Display/menu control
section (see page 11)
9
Front Panel