Fade-In And Fade-Out; Changing The Mode Settings - Sony Handycam Video 8 CCD-TR606E Service Manual

!'.:)
0
I
!'.:)
30
Fade-in and Fade-out
You can fade a picture in or out with sound to give your recording a professional appearance.
When fading in, you can make the picture gradually appear from black or mosaic while increasing the
sound. When fading out, you can make the picture gradually fade to black or mosaic while decreasing·
the sound.
When Fading in [a]
(1) While the camcorder is in Standby mode, press FADER. (2) Press START/STOP. The fade indicator
stopS flashing and the recording starts fading in.
When Fading out [b]
(1) During recording, press FADER. (2) Press START/STOP. The fade indicator stops flashing and the
picture fades out. Then, recording stops.
1
**"
[b]
ii:f
1
To Cancel the Fade-in/Fade-out Function
Before pressing START/STOP, press FADER until the fade indicator disappears.
Changing the Mode Settings
Selecting the Mode Setting of Each Item
REC MODE <SP/LP>
ln PLAYER mode, this option is not displayed.
• Select SP to record a tape in the SP {standard play) mode.
• Select LP to record in the LP {long play) mode.
AUTO DATE <ON/OFF>
In PLAYER mode, this option is not displayed.
• Select ON to record the date for 10 seconds after recording has started.
• Select OFF for not recording the date.
COMMANDER <ON/OFF>
• Select ON when using the supplied Remote Commander for the camcorder.
• Select OFF when not using the Remote Commander.
BEEP <ON/OFF>
• Select ON to hear the beep sound.
• Select OFF otherwise.
WIND <ON/OFF>
In PLAYER mode, this option is not displayed.
• S.elect ON when recording in a strong wind.
• Normally select OFF.
EDIT <ON/OFF>
In CAMERA mode, this option is not displayed.
• Select ON to minimize picture deterioration when editing.
• Select OFF otherwise.
HiFi SOUND <STERE0/1/2>
In CAMERA mode, this option is not displayed.
• Normally select STEREO.
• Select 1 or 2 to play back a dual sound track tape.
2
~
·~
<P~~oll'l
32
Changing the Mode Settings
You can change the mode settings in the menu system to further enjoy the features and functions.
(1) Lift up the viewfinder. (2) Press MENU to display the menu in the viewfinder. ([a] Menu for CAMERA
mode, [b] Menu for PLAYER mode) (3) Press ITEM to move the cursor.,. and select
t~e
desired item.
(4) Press SET to move the cursor
e
or 0 and set the desired mode. If you want to change the other
modes, repeat steps 3 and 4. (5) Press MENU to erase the menu diSplay.
2
(a)JMENU
[b)
I
MENU
MENU
§1
Note on the cursor
0
.,. REC MODE oSP LP
AUTO DATE OON OFF
COMMANDER • ON OFF
BEEP •ON OFF
WIND
•OFF ON
fMENU]:END
3
REC
MOO£
OSP
I•AUTO DATE OQ!i
~~
5
.,. COf...t.W.IDER •'ON OFF
BEEP e'QN OFF
EDIT •OFF ON
HiFi SOUND • STEREO 1 2
fMENU]:END
4
8
§10
The settings of items marked with the cursor 0 are retained even when the battery is removed, as long
as the lithium battery is in place.
Editil'lg)()J1t() AnQtljer
or
ape
:
You can create your own video programme by editing with any other
m
8 mm,
folic!
HiS,
[YDS]
VHS,
SWS.
S-VHS,
lmsJ!J
VHSC,
SMISI!I
S-VHSC,
m
Betamax or
li!ilBetal
ED Betamax VCR that has
audio/video inputs.
Before Editing
Connect the camcorder to the VCR using the AIV connecting cable (supplied). (p. 20)
Set the input selector on the VCR to LINE, if available. · ,
(1) Set the POWER
s~itch
to PLAYER. (2) Set EDIT to ON in the menu system (p. 32).:
20
8
e
MENU ITEM SET
DOO
fMENU]:END
=!:::::::,._
Signal flow
OFF
OFF
~~
it]
1
t
~~IVCRI
If your VCR is a monaural type, connect only the white plug for audio on b'oth the camcorder and VCR.
-n
"'
c.
')'
5'
"'
:J
c.
-n
1i
"
6
"'
()
:;,-
"'
:J
<0
5'
<0
:;,-
"
;;:
0
c.
"
"'
"
"'
5'
"' "'
31
0
:;,-
"'
:J
"'
5'
<0
5'
"
;;:
0
c.
"
"'
"
"'
5'
' £ l
m
~
5"
<0
g
0
~
~
i
"
33