Table of Contents
Advertisement
4-6 Status Display on the
The viewfinder screen displays not only the video picture but also
characters and messages indicating the camcorder settings and operating
status, a center marker, a safety zone marker, etc.
When the VF DISP switch is set to ON, the items for which an "ON"
setting was made in the VF DISPLAY page of the OPERATION menu
or with related switches are displayed at the top and bottom of the
screen. The messages that give details of the settings and adjustment
4
progress and results can also be made to appear for about 3 seconds
while settings are being changed, during adjustment, and after
adjustment.
For information about marker display, see Section 4-7-3 "Setting the Marker
Display" (page 4-42).For information about the display item selection, see Section
4-7-4 "Selecting the Display Items" (page 4-43).
4-6-1 Layout of the Status Display on the
Viewfinder Screen
All items that can be displayed on the viewfinder screen are shown
below.
1
2
3
4
5
6
7
4-34
Chapter 4 Adjustments and Settings for Recording
Viewfinder Screen
EX
HDW-700
D5600K
1A
W:A 0dB
ECS
?
12.5V
30.0Hz
15-10 F5.6
8
9
Setting change and
adjustment progress
message display area
0
!¡
!™
!£
!¢
!∞
Advertisement
Table of Contents
