Magellan MobileMapper - GPS Software User Manual page 65

Point feature being logged
Repeat Feature
From feature list
screen
Offset
(Repeat Feature)
Close <feature name>
Close Job
Delete <feature name>
*Post-processing disappears from the Setup menu once you
have entered the right activation code
The second diagram shows the available functions when
pressing MENU when a GIS job is open and one of the GIS
logging-specific screens is displayed.
Line or area feature being logged
Pause/Resume <feature name>
Repeat Feature
Offset
Close <feature name>
Nest Feature
Logging Interval
Delete <feature name>
Mark
GOTO
Routes
Setup
Delete Files
Card Utilities
About...
When data logging is in progress and one of the navigation
screens is displayed, then the functions specific to the select-
ed navigation screen and to GIS data logging add up in the
menu (functions specific to data logging are listed first).
(See also Routes option, page 59, for which the MENU button
gives access to specific functions.)
When you select the Setup option in the menu list, another
menu is displayed containing a number of options, as shown
in the above two diagrams.
All the options available from the Menu screen are described
below.
Grid feature
being logged
Repeat Feature
Offset
Close <feature name>
Nest Feature
Initialize
Select Map
Map Setup
Nav Screens
Coord System
Map Datum
Elev Mode
Time Format
Units
Alarms
North Reference
Daylight Saving
Power Off Timer
Contrast
Light Timer
Beeper
Clear Memory
NMEA
Baud Rate
Power key
Simulate
Post-processing*
Language
57