Table of Contents
Advertisement
Using the SD Card
SD Card Location
As explained earlier on page 4, the SD card is located in the
battery compartment. You need to open the battery compart-
ment door and remove the two batteries to have access to the
SD card slot.
When logging data, remember to close any open feature and
then the job before removing the batteries.
Inserting an SD card
- Hold the SD card with two fingers with the label facing up.
Place the top of the SD card in the channel provided in
the battery compartment. Carefully push the SD card
towards the top of the unit until you feel it lock into place.
Do not force the SD card.
- Reinstall the batteries into the battery compartment. Be
sure to observe the proper polarity.
- Replace the battery compartment door.
- Turn on the MobileMapper Pro unit.
Removing an SD card
- Close any open job and turn the receiver off
- Remove the battery door and then the 2 AA batteries
- Push the card slightly towards the top of the MobileMap-
per Pro. You will feel a slight click which is the locking
mechanism disconnecting and then you will feel the SD
card pushing against your finger. Allow the SD card to
slide back towards the battery compartment. Now care-
fully continue to slide the memory card out of the channel
it is in and lift it out.
75
Hide quick links:
Advertisement
Table of Contents
