Time Format; Units - Magellan MobileMapper - GPS Software User Manual

Default time format:
Local AM/PM
Default units: km/m/
kph/hectares
64

8. Time Format

This option allows you to select the time format you want
to use in MobileMapper Pro. You can choose from three
different time formats: Local 24Hrs, Local AM/PM or UTC.
After selecting the Time Format option from the Setup
menu, choose the time format that suits you and then
press ENTER.
If you have selected Local 24 Hrs or Local AM/PM, you will be
prompted to enter your local time.

9. Units

This option allows you to select the units of measurement
that will be used when displaying navigational data or fea-
tures being logged.
All sets of units are formatted as follows: long distance unit/
short distance unit/speed unit/area unit.You can select from 5
different sets of units.
You can also create your own set of units by selecting
Advanced at the end of the list. You are then prompted to
specify the unit you wish to use for each type of possible
measure, i.e. Distance, Speed, Elevation, Bearing and
Area.
After selecting the Units option from the Setup menu,
choose a set of units from the displayed list and then
press ENTER. If you have selected Advanced, a new list
appears prompting you to choose a unit for each type of
measure. Select the first measure in the list, press
ENTER, choose a unit and press ENTER again. This takes
you back to the former screen where you can select the
second measure, etc. When all units are defined, press
ESC to come back to the Setup menu.