Simulate; Post-Processing - Magellan MobileMapper - GPS Software User Manual

21.Simulate

This option allows you to set the simulator. It shows you how
MobileMapper Pro uses its various functions based on a sim-
ulated journey. The simulator is useful for learning or demon-
strating MobileMapper Pro's GPS functions when indoors and
there is no GPS reception. When the simulator is on, Mo-
bileMapper Pro quits normal operation to operate in the sim-
ulator mode. You can choose one of the following three
options when you access the Simulate option:
- Off: Will turn the simulator off. MobileMapper Pro will
return to normal operation
- Auto: Will turn the simulator on. A predefined heading
and speed rate will be used.
- User: Will turn the simulator on. A user-defined head-
ing and speed rate will be used.
After selecting the Simulate option from the Setup menu,
use the up/down arrow to highlight the desired choice and
then press ENTER.
If you have selected User, MobileMapper Pro will then ask
you to enter heading and speed data.

22.Post-processing

This option allows you to enter the activation code needed
to enable the post-processing option in the receiver.
71