Magellan MobileMapper - GPS Software User Manual page 46

The Map screen must
be in Position mode if
you wish to customize
data fields. If the Map
screen is in cursor
mode (cursor is a
cross-hair), press ESC
to return to the Posi-
tion mode.
Map Setup screen,
Format tab
38
Select Map Info
Use this option to tell MobileMapper Pro which data should
be displayed at the bottom of the Map screen. This can be:
- Customize Fields. This function is equivalent to the Custom-
ize function available from all navigation screens other
than the Map screen. See page 47.
- Street info: This option displays an information block at the
bottom of the display showing the name of the street your
present position or cursor is on. If in the cursor mode, the
bearing and distance from your present position are dis-
played.
Map Setup
You can make the following settings using the Map Setup op-
tion. To access this option, press MENU when the Map screen
is displayed, select Setup and then select Map Setup. The
screen that appears contains two tabs: the Format and Display
tabs.
On the Format tab, you can set the following parameters:
- Orientation: You can change how the map is orientated on
the screen to either North Up, Course Up or Track Up.
Default is North Up.
- Detail: Use this field to set the map detail. The detail of
the map can be set to highest, high, medium, low or low-
est. This changes the zoom level that different map
objects (cities, highways, labels, etc.) are displayed. If you
have set a zoom level and the display is too cluttered, set
the map detail to a lower level; conversely set it to a higher
level to view more detail.