Creating A New Job With The Post-Processing Option - Magellan MobileMapper - GPS Software User Manual

Welcome screen with
post-processing option
enabled
Job Mode screen
34
If you then press MENU and come back to the Setup
menu, the Post-processing option will no longer be there
because you only need to enter the Activation Code once.
Creating a New Job with the Post-Processing Op-
tion
- If there is a job that is currently open, close it by pressing
MENU and selecting Close Job
- Press LOG. MobileMapper Pro displays the Welcome
screen. This screen shows three options (instead of two
when the post-processing option is not enabled).
- Highlight Create New Job and press ENTER.
- Enter the job name as explained earlier (see page 12).
- After entering the name, highlight the OK key on the
screen and press ENTER. A new screen is then displayed
listing the feature libraries stored on the receiver's SD
card.
- Highlight the library you want to use and press ENTER. A
new screen is then displayed asking you to choose the job
mode:
• Real-time: If you select this job mode, the receiver will
record only feature positions and descriptions and GPS
metadata. Jobs recorded in real-time mode cannot be
differentially corrected later on.
• Post-processing: Select this job mode to allow
MobileMapper Pro to record the job so that later on, it
can be post-processed in MobileMapper Office. In this
job mode, MobileMapper Pro will record GPS measure-
ments files in addition to the MMJ job file that is
recorded in real time.