Messages regarding printheads
Cannot adjust printhead. ................................................................................................................................. 995
PHeads: wrong pos. ....................................................................................................................................... 995
Wrong x printhead. (x is L, R, or not displayed) .............................................................................................. 995
x printhead error (x is L, R, or not displayed) .................................................................................................. 996
No x printhead (x is L, R, or not displayed) ..................................................................................................... 996
Execute printhead cleaning. ............................................................................................................................ 996
Cannot adjust printhead.
Cause
The Printhead nozzles
are clogged.
The Printhead cannot
be aligned; highly
transparent film is
loaded.
PHeads: wrong pos.
Cause
The printheads are installed in the
wrong positions.
Wrong x printhead. (x is L, R, or not displayed)
Cause
An incompatible
Printhead has been in-
stalled.
iPF6300
Execute Head Posi. Adj. again, as follows.
1. Press the OK button to clear the error.
2. Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.")
3. Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
4. Execute Head Posi. Adj. again.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")
→P.765
Press the OK button to clear the error.
We recommend using a type of paper that you often use, other than film, for Printhead adjust-
ment.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")
→P.765
Open the Top Cover and switch the Printhead used once in the right side to the
right side. Switch the Printhead used once in the left side to the left side.
Open the Top Cover. Replace the Printhead L with a new one if Printhead L is displayed and
the Printhead R if Printhead R is displayed. If neither left or right is indicated, replace both
Printhead L and Printhead R with new ones.
(See "Replacing the Printhead.")
Error Message
>
Messages regarding printheads
Corrective Action
→P.909
→P.910
Corrective Action
Corrective Action
→P.911
>
Cannot adjust printhead.
12
995