Canon 3807B007 User Manual page 742

Handling Paper >
5.
Insert the edge of the roll in the Paper Feed Slot (a) and advance the roll until you hear the feed tone.
6
6.
Once paper feeding starts, you will need to do the following, based on the ManageRemainRoll setting and the bar-
code printed on rolls. (See "Keeping Track of the Amount of Roll Paper Left.")
Manag-
eRemain-
Roll
Off
724
On
Loading Rolls in the Printer
Handling rolls >
Note
• If it is difficult to load rolls from the front of the printer, load rolls from the back of the printer.
Important
• Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the
printing quality. We recommend wearing clean cloth gloves when handling rolls to protect the print-
ing surface.
• If the paper is wrinkled or warped, straighten it out before loading it.
• Load paper straight so it is not fed askew.
Barcodes
Printed A menu for selection of the type of paper is automatically shown on the Display Screen.
Press ▲ or ▼ to select the type of paper, and then press the OK button.
Not prin-
ted
Printed The type and amount of paper left is automatically detected based on the barcode printed
on the roll.
There is no need to specify the type and length of the paper.
Not prin- A menu for selection of the paper type and length is automatically shown on the Display
ted Screen.
Press ▲ or ▼ to select the type and length of paper loaded, and then press the OK button.
Printer Operation After the Paper is Fed
→P.732
iPF6300