Canon 3807B007 User Manual page 864

Printer Parts > Control Panel
System
Setup
Prep.MovePrinter
Ad-
min.
8
Menu
846
Printer
Info
Menu Settings
>
Setting Item
Nozzle Check
Use RemoteUI
Reset PaprSetngs
Show Job Log
Change Password
Init.Admin.Pswd
Paper Info
Ink Info
Head Printhead L
Info
Printhead R
Description, Instructions
In Frequency, specify the timing for automatic
checks of nozzle clogging. Choose Standard to have
the printer adjust the timing for checks based on the
frequency of nozzle use. Choose 1 page to check
once per page.
Select Warning > On to display warnings if the noz-
zles clog during printing.
Choosing Off prohibits access from RemoteUI. Set-
tings can only be configured from the control panel.
Restores settings that you have changed with Media
Configuration Tool to the default values.
Selecting Off prevents display of the log in Job
Menu > Job Log. Additionally, the log is not printed
if you choose Job Menu > Print Job Log. Note that
because job logs are not collected, the Status Monitor
accounting functions will not work correctly.
Select this option when transferring the printer to an-
other location. Follow the instructions displayed to
complete the required procedure. (See "Preparing to
Transfer the Printer.")
→P.932
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
By setting a password, you can restrict menu display
and configuration as follows. Enter a number in the
range 0–9999999.
• Viewing and configuration
administrators only
IPv4 Settings
Change Password
Init.Admin.Pswd
Viewing and configuration
•
administrators, and only viewing by other
users
Interface Setup settings (except IPv4 Settings )
Date & Time
Date Format
Time Zone
Use RemoteUI
Reset PaprSetngs
Choose OK to restore the Admin. Menu password
to the default values.
Indicates the current paper size, type, and related
printer settings.
Indicates ink levels and maintenance cartridge ca-
pacity.
Indicates information about the printhead.
by
by
iPF6300