Mediatype Mismatch; The Paper Is Too Small - Canon 3807B007 User Manual

MediaType Mismatch

Cause
When Detect Mismatch in the Control
Panel menu is set to Pause, the type of
paper loaded does not match the type
specified in the printer driver.
When Detect Mismatch in the Control
Panel menu is set to Warning, the type of
paper loaded does not match the type
specified in the printer driver.

The paper is too small.

Cause
When Detect Mismatch in the Control Panel
menu is set to Pause, paper smaller than the
size specified in the printer driver is loaded.
iPF6300
Corrective Action
Follow these steps to ensure the paper type matches on the printer and in
the printer driver.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Replace the loaded paper with paper of the type and size you have
specified in the printer driver.
The printer will resume printing.
(See "Loading and Printing on Rolls.")
(See "Loading and Printing on Sheets.")
Follow these steps to ensure the paper type matches on the printer and in
the printer driver.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Either change the type of paper specified in the printer driver settings
or replace the loaded paper and change the paper type setting on the
printer.
(See "Loading and Printing on Rolls.")
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ to select Print, and then press the OK button to resume
printing.
However, note that this error may cause paper jams and affect the printing
quality.
You can continue to print, but note that this error may cause problems in
the printing results.
Corrective Action
Press ▲ or ▼ to select Print, and then press the OK button to resume
printing.
However, note that this error may cause paper jams and affect the
printing quality.
Adjust the paper size setting in the printer driver to match the size loa-
ded in the printer as follows.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK but-
ton.
2. Change the paper size setting in the printer driver to the size loaded
in the printer and try printing again.
Replace the loaded paper with paper of a size that matches the size set-
ting in the printer driver as follows.
1. Press ▲ or ▼ to select Change Paper, and then press the OK but-
ton to stop printing.
2. Replace the loaded paper to match the paper width setting in the
printer driver and try printing again.
Error Message > Messages regarding paper
→P.3
→P.6
→P.3
→P.6
MediaType Mismatch
>
12
979