Excessive Temperature Or Humidity; Before Borderless Printing, Move The Blue Platen Switch; Blue Platen Switch Is Dirty; Move The Blue Platen Switch No.xx To The Right. (Xx Represents A Number) - Canon 3807B007 User Manual

Cause
The test pattern was printed too faintly.
Direct sunlight or strong lighting may be shin-
ing on the printer and causing the sensor to
malfunction.

Excessive temperature or humidity.

Cause
The temperature or humidity where
the printer is installed is out of the
acceptable range for operation.

Before borderless printing, move the blue platen switch.

Cause
The blue Switch on the platen was set to the side
opposite ● when a borderless print job was re-
ceived.

Blue platen switch is dirty.

Cause
The blue Switch on the platen is dirty.

Move the blue platen switch No.xx to the right. (xx represents a number)

The printer has detected that the blue Switch on the plat-
en needed in maintenance during printing is set away
from the ● mark.
iPF6300
Take steps to remedy faint printing.
(See "Printing is faint.")
Press the OK button to clear the error.
Take steps to ensure the printer is not used when exposed to direct
sunlight or strong lighting.
Press ▲ or ▼ to select Stop, and then press the OK button to stop printing.
Use the printer under suitable environmental conditions. Also note that various
environmental conditions are recommended for various types of paper. For de-
tails on the recommended environmental conditions, see the Paper Reference
Guide.
(See "Types of Paper.")
Press ▲ or ▼ to select Continue, and then press the OK button to continue
with color calibration. However, note that correct adjustment may not be possi-
ble.
Before borderless printing, set the blue Switch on the platen to
the ● side.
Open the Top Cover and clean the blue Switch on the platen.
(See "Cleaning Inside the Top Cover.")
Cause
Error Message > Messages regarding printing or adjustment
Corrective Action
→P.954
Corrective Action
→P.712
Corrective Action
(See "Setting the Blue Switch on the Platen.")
Corrective Action
→P.927
Corrective Action
Set blue platen Switch of the indicated number toward the ●
side.
(See "Setting the Blue Switch on the Platen.")
Excessive temperature or humidity.
>
→P.961
12
993
→P.961