Canon 3807B007 User Manual page 784

Adjustments for Better Print Quality
Important
• This function is not available with CAD Tracing Paper or CAD Translucent Matte Film.
If adjustment is not possible as expected using highly transparent film or similar media, try another type of
paper, or try Manual adjustment.
(See "Manual Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")
Note
• Because the results of adjustment vary depending on the type of paper used for adjustment, use the same type
of paper as you will use for printing. Even if you will print on a different type of paper, we recommend using
Auto(Advanced) for adjustment.
• If Auto(Advanced) does not improve printing, try adjustment in Manual mode.
(See "Manual Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")
• Advanced adjustment can enable superior printing quality when printing fine lines or text at high precision
on glossy or semi-glossy photo or proofing paper.
(See "Enhancing Printing Quality.")
Items to Prepare
Rolls An unused roll at least 10 inches wide
Sheets Auto(Standard) : Two sheets of unused paper, A4/Letter size
Auto(Advanced) : Ten sheets of unused paper, A4/Letter size (or five sheets when using A2)
Auto(Expansion) : Seven sheets of unused paper, A4/Letter size (or four sheets when using A2)
Perform adjustment as follows.
7
1.
Load the paper.
• Loading Rolls on the Roll Holder
• Loading Rolls in the Printer
• Loading Sheets in the Feed Slot
2.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab (
766
3.
Press the OK button.
The Set./Adj. Menu is displayed.
4.
Press ▲ or ▼ to select Adjust Printer, and then press the OK button.
Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.)
> Adjusting the Printhead
→P.722
Important
• Always make sure the loaded paper matches the type of paper specified on the printer. Adjustment
cannot be completed correctly unless the loaded paper matches the settings.
Note
• If the Tab Selection screen is not displayed, press the Menu button.
>
→P.763
→P.718
→P.747
→P.767
→P.767
).
iPF6300