Canon 3807B007 User Manual page 903

Specifying the frame type using the printer Control Panel
1.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab (
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2.
Press the OK button.
The Set./Adj. Menu is displayed.
3.
Press ▲ or ▼ to select Interface Setup, and then press the OK button.
4.
Press ▲ or ▼ to select NetWare, and then press the OK button.
5.
Press ▲ or ▼ to select NetWare, and then press the OK button.
6.
Press ▲ or ▼ to select On, and then press the OK button.
The display reverts to the NetWare menu.
7.
Press ▲ or ▼ to select Frame Type, and then press the OK button.
8.
Press ▲ or ▼ to select the frame type to use, and then press the OK button.
The display reverts to the NetWare menu.
9.
Press ▲ or ▼ to select Print Service, and then press the OK button.
10.
Press ▲ or ▼ to select the desired print service, and then press the OK button.
The display reverts to the NetWare menu.
11.
Press the Menu button.
If you have changed any settings, a confirmation message is displayed. In this case, press the OK button.
Important
• Be sure to complete step 11. This will activate the values you have entered.
iPF6300
Network Setting > Network Setting (Windows)
Specifying the Printer's Frame Type
>
).
9
885