Prepare For Parts Replacement; Parts Replacement Time Has Passed; Unknown File; Calibration There Is A Problem With The Multi-Sensor - Canon 3807B007 User Manual

Error Message >

Prepare for parts replacement.

It is almost time to replace consuma-
bles for which service is required.

Parts replacement time has passed.

It is past the recommended time to replace consumables for which service
is required.

Unknown file.

Data sent to keep the printer up to date (such as
paper information) is in the wrong format.
12
You have uploaded firmware for a different
model.

Calibration There is a problem with the multi-sensor.

1000
The performance of a sensor inside the printer
may be impaired.
Prepare for parts replacement.
Other Messages >
Cause
Cause
Cause
Cause
Cause
Turn off the printer and wait at least three seconds be-
fore restoring the power.
If the message is displayed again, write down the error
code and message, turn off the printer, and contact your
Canon dealer for assistance.
Corrective Action
If "Parts replacement time has passed." is displayed, you can continue to
use the printer for some time.
Contact your Canon dealer for assistance.
Check the print job. Turn off the printer and wait a while before re-
storing power, and then resend the data.
Check the firmware version. Turn off the printer and wait a while
before restoring power, and then resend the firmware.
If the message is displayed again, contact your Canon dealer for as-
sistance.
Press the OK button and cancel calibration. Contact your Canon
dealer for assistance.
Corrective Action
Corrective Action
Contact your Canon dealer for assistance.
Corrective Action
Corrective Action
iPF6300