Messages Regarding Ink; Ink Insufficient; Remaining Level Of The Ink Cannot Be Correctly Detected; No Ink Left - Canon 3807B007 User Manual

Messages regarding ink

Ink insufficient. ................................................................................................................................................ 989

No ink left. ....................................................................................................................................................... 989

Remaining level of the ink cannot be correctly detected. ................................................................................ 989

Close Ink Tank Cover ...................................................................................................................................... 990
Not much ink is left. ......................................................................................................................................... 990
No ink tank loaded. .......................................................................................................................................... 990
Wrong ink tank. ............................................................................................................................................... 991
Ink insufficient.
The ink level is low, so you cannot print, clean the Printhead, or do other opera-
tions that require ink.
No ink left.
Cause
There is no ink left.
Remaining level of the ink cannot be correctly detected.
Cause
Ink level detection cannot work cor-
rectly if you use refill ink tanks.
iPF6300
Cause
Open the Ink Tank Cover and replace the Ink Tank for which the Ink Lamp is flashing.
(See "Replacing Ink Tanks.")
The refill ink tank can no longer be used. See the section Ink level detection
and take the appropriate action. (See "Ink Level Detection.")
Error Message
Press ▲ or ▼ to select Rep. Ink
Tank, and then press the OK but-
ton. Replace the Ink Tank that is
low with a new Ink Tank.
(See "Replacing Ink Tanks.")
→P.900
Press ▲ or ▼ to select Continue
to print, and then press the OK
button to resume printing. Howev-
er, note that this error may affect
the printing quality.
If the printer is in Standby mode,
press the OK button and replace
the Ink Tank that is low with a new
Ink Tank.
(See "Replacing Ink Tanks.")
→P.900
Corrective Action
→P.900
Corrective Action
> Messages regarding ink >
Corrective Action
→P.971
Ink insufficient.
12
989