Canon 3807B007 User Manual page 737

Using Rolls with a 2-inch Paper Core
Attach the Spacer for Borderless Printing to the Roll Holder.
Caution
• Set the roll on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and dropping a roll
may cause injury.
Important
• When handling the roll, be careful not to soil the printing surface. This may affect the printing quality. We
recommend wearing clean cloth gloves when handling rolls to protect the printing surface.
• Align the edges of the paper on both ends of the roll. Misalignment may cause feeding problems.
• Cut the edge of the roll using the Paper Cutting function if the edge is creased or soiled. (See "Specifying
the Cutting Method for Rolls.")
• If the paper is badly creased, cut the edge of the roll with scissors before loading the roll in the printer, and
then cut the edge of the paper using the Paper Cutting function. (See "Specifying the Cutting Method for
Rolls.")
→P.735
Note
• For details on supported sizes and types of rolls, see Paper Sizes or the Paper Reference Guide. (See "Paper
Sizes.")
→P.715
• To view instructions as you attach the Roll Holder, press the Navigate button. (See "How to View Instruc-
tions with Navigate.")
1.
Remove the Holder Stopper from the Roll Holder.
iPF6300
→P.735
(See "Types of Paper.")
→P.712
→P.825
Handling Paper
Using Rolls with a 3-inch Paper Core
Loading Rolls on the Roll Holder
> Handling rolls >
6
719