Transparency Interleaving; Inserting Backing Sheets Between Transparencies; Page Insert - Kyocera TASKalfa 3051ci User Manual

Publishing

Transparency Interleaving

Inserting Backing Sheets Between Transparencies

1
2
3
4
5
6

Page Insert

9-5
Check Box Selection
Front and back
Front Outside
Front Inside
Back Inside
Back Outside
Transparency interleaving inserts a backing sheet between printed
transparencies. The backing sheet, also known as an interleaf, helps keep
transparencies clean and prevents them from clinging together. This feature is
only available when printing on transparencies supplied from the MP tray. You
can print the same content on the backing pages as on the transparencies.
Transparency interleaving cannot be used together with Cover mode, Page
insert, or Index tab dividers.
In Basic > Media type, select Transparency. If the Source and Media type
lists have been combined (by a selection in Device Settings > Compatibility),
Media type does not appear. Instead, in the Source list select Auto
(Transparency).
In the Publishing tab, click the Transparency interleaving icon.
To print the transparency content on the inserted pages also, select the Print
onto backing check box.
In the Media for backing list, select the media type or source cassette. When
you choose the media type, a source cassette matching that media type is
automatically selected.
Click OK to return to the Print dialog box.
Click OK to start printing.
The printing system's operation panel prompts you to load transparencies into
the MP tray, and if necessary, load backing paper into the selected cassette.
A Page insert is a preprinted page or a page of a different paper type that is
inserted at specified points in a print job. The inserted page can also be printed
on during the print job. Both sides of the page insert can be printed on by using
the duplex unit.
Cover Insertion Type
Prints on both sides of the front and
back covers.
User Guide