User Login; User Login Options - Kyocera TASKalfa 3051ci User Manual

Device Settings
4

User Login

User Login Options

3-9
In the Password Settings dialog box, type a password from 4 to 16 characters.
Retype the password in Confirm password, and click OK.
To remove the password, clear the Password settings check box. In the
Unlock Password dialog box, type the password, and click OK.
To save your Lock Settings selections, click OK.
When a password is set, the Unlock icon appears in driver tabs where the
locked features appear. To unlock a feature and change its settings temporarily,
click Unlock and type the password.
User login provides job restriction by user, in contrast to the Job accounting
feature, which assigns privileges by division or department. A maximum of 1000
login user names and passwords can be registered at the printing system and
1000 User IDs and passwords can be stored in the printer driver for use with
multiple printing systems.
User login adds users with a user name and password. The user name can
be in user principal name (UPN) format: username@domain.com. The UPN
format supports multiple domains. The UPN format is not needed if the default
domain registered in the device is used.
This feature limits printing privileges to specified users for secure printing and
accounting. The number of pages printed by each user will be tracked by the
printing system.
Users added in the printer driver must also be manually registered at the
printing system's operation panel.
In a client/server environment, some options are unavailable to a client
computer.
For a restricted user in a client/server environment, the Administrator button in
Device Settings becomes the Identity button. A user can enter User Login
data in the Identity Settings dialog box.
User login settings selected in the driver are applied to every print job sent from
your computer.
Use specific name
This option can be used to specify a name and password to use the same
User login for every print job. If this option is selected, the user does not
have to type the name and password for each print job.
A client computer in a client/server environment can accept the default name
and password set by the administrator or type another name and password.
Clicking Reset restores the default values.
Prompt for name
This option prompts the user for a name and password. You can use a name
that is not on the list, and the name is not added to the list. When sending a
print job, type a name and password when prompted, then click OK to print.
Prompt for name and validate
This option prompts for a name and password. For the job to print, the name
and password entered must be on the Login user name list. You can use
the Login user names entered in the Login user name list of the driver.
When sending a print job, type a name and password when prompted, then
User Guide