Finishing Edge Combinations; Setting The Finishing Edge; Positioning Options For Finishing Edge - Kyocera TASKalfa 3051ci User Manual

Finishing Edge Combinations

Setting the Finishing Edge

1
2
3
4
5
6
7

Positioning Options for Finishing Edge

Printer Driver
edge of an A3 page; or the short edge of a letter size page is aligned with the
short edge of a legal size page. Finishing edge can be used with or without the
staple or punch features.
You can choose the position of staples in a document composed of mixed page
sizes. In contrast, if you are printing a mixed page size document without using
Finishing edge, staple positions depend on the paper size settings (portrait or
landscape) in the paper cassettes.
Finishing edge should be selected before any other features in the Finishing
tab. If set last, Finishing edge might change any settings that you previously
made under Staple.
Selecting Finishing edge makes some other features unavailable, such as
Separation and Rotated. Finishing edge cannot be used with the Poster
feature.
Finishing edge can be used with the following page size combinations:
A4 and A3 (210 x 297 mm and 297 x 420 mm)
B5 (JIS) and B4 (182 x 257 mm and 257 x 364 mm)
Letter and Legal (8.5 x 11 in. and 8.5 x 14 in.)
Letter and Ledger (8.5 x 11 in. and 11 x 17 in.)
16K and 8K (197 x 273 mm and 273 x 394 mm)
In the Basic tab, select the same size for Print size and Page Sizes.
In Basic > Source, select Auto source selection.
In the Finishing tab, click the Finishing edge icon.
In the Position list, select from available options, or select Custom. Positions
are based on the Print size selection in the Basic tab.
Click OK in all driver dialog boxes.
Load each paper size into different paper cassettes. For example, load A4 and
A3 paper so that both sizes feed the 297 mm edge or load letter and legal paper
so that both sizes feed the 8.5 inch edge.
Click OK in the application's Print dialog box.
If the printer driver determines that the specified paper size or direction (short or
long edge) is unavailable in the printing system, the operation panel message
requests that you load the correct paper size into the cassette with the correct
orientation.
You can select from available options to specify the page edges to be aligned
and finished. For additional position settings, select Custom. Available options
Finishing
7-4